Wood Work|ADR-502C/652C|

ADR-652C

Building upon accumulated know-how, we're adding new technologies!
A state-of-the-art machine that delivers high performance at an affordable price!
In addition to the ADR-502C (maximum processing width approximately 500 mm), the ADR-652C (maximum processing width 646 mm) is now also available!
Control Panel: The push buttons for the face sheet are located on the left side of the frame. This prevents dust from entering and ensures excellent operability.
Reliable material feeding: The table uses a belt system, and the upper roll is also driven. There is no need to worry, especially when cutting sheet metal or large pieces of material.
Direct-drive motor: Simple, powerful, and easy to maintain.

Machine specifications
Model		ADR-502C	ADR-652C
Max. cutting dimensions (width x height)		496 x 400 mm	646 x 400 mm
Max. cutting amount		8 mm
Min. cutting height		5 mm
Auto-return minimum height		15 mm
Table height from the floor		820 mm
Blades used		500 x 32 x 5 mm, 3 pieces, Jointer knife	650 x 32 x 5 mm, 3 pieces, Jointer knife
Main spindle cutting edge diameter		φ100 mm
Spindle speed: 50/60Hz		4600 / 5500 min^-1
Material feeding speed		5~20 m/min
Return speed		20 m/min
Motor	Main shaft	3.7 kW	5.5 kW
	Up and down	0.4 kW
	Material feeding roller	0.2 kW	0.4 kW
	Material feeding belt	0.4 kW	0.75 kW
Dust collection diameter		φ150 mm
Machine dimensions (width x length x height)		1218 x 4765 x 1412 mm	1425 x 5490 x 1412 mm
Machine mass		940 kg	1200 kg
Option
Increased main shaft horsepower		5.5 kW	7.5 kW
Enshinblock		φ100 x 500 mm 3P HC Reinforced Type	φ100 x 650 mm 3P HC Reinforced Type
Sectional roller		〇
Foot pedal		〇
Addition of upper material feed roller		〇